Komfovent Domekt CF 500 F (C6) heat recovery unit filter set M5+M5

29.98 

Retains medium-sized dust – suitable for any time of the year

Set includes of 2 pcs. M5 class filters. Dimensions: 484×250×46 mm

SKU: CF500FC6M5M5 Category: ,

Description

Komfovent Domekt CF 500 F (C6) heat recovery unit filter set M5+M5 – for everyday protection

Retains medium-sized dust – suitable for any time of the year.

 

Filter dimensions:

  • 484×250×46 mm

 

Corresponds to filters of ventilation unit manufacturer :

  • 774100166

 

Need more efficient filtration?

Order Komfovent Domekt CF 500 F (C6) heat recovery unit filter set F7+M5 – for sensitive andallergic

 

By ordering Komfovent Domekt CF 500 F (C6) heat recovery unit filter set M5+M5, you will receive:

  • 2 pcs. of Komfovent Domekt CF 500 F ((C6) M5 class filters for supply and exhaust air.

 

Filtration class:EN 779:2012ISO 16890
Supply air filterM5ePM10 55%
Exhaust air filterM5ePM10 55%

 

It is recommended to replace M5 class filters once each 6 months.

 

Important information about replacing air filters:

  • The heat recovery ventilation device filters must be replaced when unit indicates air filter clogging. It is recommended to replace filters at least 2 times a year: before and after the heating season, or more often, depending on the pollution of the environment in which you live and the intensity of use of the ventilation unit.
  • Heat recovery ventilation device filter is a disposable product, it is not recommended to reuse it after vacuuming or other type of cleaning.
  • It is recommended to switch off the air handling unit before replacing filters, thus protecting it from dust and other unwanted objects.
  • It is recommended to clean the filter mounting section as well, when replacing filters.
  • Clogged filters unbalance your ventilation system, the unit uses more energy, emits more noise!

 

For information on how to replace Komfovent Domekt CF 500 F (C6) heat recovery ventilation device filters, refer to the installation and maintenance instructions for the air handling unit.

 

Air filter design:

  • The filter frame is made of impregnated, moisture-resistant cardboard.
  • The new type of corrugation, by gluing the folds together, ensures the lowest possible resistance to air flow and a largest possible area of ​​the dust-retaining filtering material.
  • The filtering material is glued to the frame on all four sides, thus ensuring that dust does not enter the room through filter leaks.
  • The filtering material filler is made of a multi-layer synthetic filtration material that meets the requirements of ISO 16890 and EN 779:2012 standards.

Additional information

Dimensions48.4 × 25 × 4.6 cm